两类锁骨钩钢板初步应用对比

目的评价两类锁骨钩钢板治疗肩锁关节脱位的临床比较。方法应用两类不同的锁骨钩钢板治疗肩锁关节脱位TossyⅢ型37例，L型锁骨钩钢板内固定26例，U型锁骨钩钢板内固定11例。结果37例随访9～29个月，平均18个月，按Karlsson分类进行评价；L型锁骨钩钢板固定组A级23例，B级3例；U型锁骨钩钢板固定组A级5例，B级6例，C级1例。结论两类锁骨钩钢板都是治疗肩锁关节脱位的可靠方法。L型锁骨钩钢板操作更简便，损伤更小．切口更短，功能恢复更快，更满意。     

Biomechanical evaluation of caudally and buccally screwed customised reconstruction plates for lateral segmental defects of mandible

The aim of this study was to compare locking reconstruction plates with caudobuccally screwed custom mandibular reconstruction plates in bridging lateral mandibular segmental defects. The in vitro study was conducted on 13 polyurethane mandibles. A total of 7 mandibles with lateral segmental defects were bridged with locking reconstruction plates in group I, 6 mandibles with the same standard defect were bridged with caudobuccally screwed customised reconstruction plates in group II. Mean yield displacement, yield load, and displacement at 80 N (Newtons), 100 N, 200 N, 300 N loading were compared among the 2 groups. The mean (SD) displacement for Group I was 11.27 (3.6) mm, Group II was 21.08 (2.5) mm. Group II had significantly greater (p=0.0001) displacement when compared with Group I. The mean (SD) force before failure for Group I was 638.4 N (127.2), Group II was 1398. 3 N (162.7). Group II withstood significantly greater force than Group I (p=0.0001). The study reveals that the caudobuccally screwed custom reconstruction plates can significantly enhance yield load as preserving the preoperative shape of the face and mandible.     

Fixation of subcondylar fractures of the mandible: a randomized clinical trial comparing one trapezoidal plate with two miniplates

Subcondylar fracture of the mandible accounts for 25–35% of all mandibular fractures. In the past, most subcondylar fractures were managed non-surgically. The traditional method of fixation for subcondylar fractures uses two miniplates; however some bench studies have reported that trapezoidal plates are superior. The aim of this study was to compare the outcomes of subcondylar fractures fixed either with two non-parallel straight miniplates or with one trapezoidal plate. A randomized clinical trial was designed and implemented. Fifty-two consecutive patients with subcondylar fractures were recruited. All patients underwent surgery via a retromandibular approach. The time taken for fixation of the plate after fracture reduction and postoperative outcomes and complications were compared between the groups. The trapezoidal plates were superior in terms of ease of adaptation and time taken for fixation (P =  0.0001). Plate fracture was observed only in the two miniplates group, in four (16%) patients. Outcomes were similar in the two groups in terms of occlusion, mouth opening, protrusion, and lateral excursion. In conclusion, both systems – two miniplates and the trapezoidal plate – provide functionally stable fixation. The outcome was significantly better for the trapezoidal plate than for two miniplates regarding the time taken for insertion and ease of adaptation, but not for other parameters.     

Correction osteotomy of distal radius malunion stabilised with dorsal locking plates without grafting

The purpose of this study was to evaluate the results of our correction osteotomies of distal radial malunions without a bone graft. Eleven consecutive patients (mean age 52 years, range 18–71) were treated. A dorsal approach was utilised to perform an opening-wedge osteotomy which then was stabilised with two dorsal columnar plates without filling the osteotomy gap. All patients went on to radiographic union with a filling of the osteotomy gap within a mean period of 3 months (range 2–6 months). All patients had satisfactory results in terms of function and pain. Correction osteotomy and stabilisation with bicolumnar locked plate fixation without a bone graft provides sufficient stability to allow the highly vascularised metaphysis to heal. In patients without risk factors predisposing to non-union, this procedure is safe and feasible.     

Fixation of complex proximal humeral fractures in elderly patients with a locking plate: A retrospective analysis of radiographic and clinical outcome and complications

Purpose: The optimal surgical treatment of displaced type B and C fractures of the proximal humerus in the elderly remains controversial. Good clinical results have been reported by plating these fractures as well as a high rate of complications. Our retrospective study aims to evaluate clinical recovery and complications using the S3 locking plate in elderly patients. Methods: Fifty-one patients older than 65 years of age, with a complex proximal humeral fracture type B or C (AO classification system), were included. Patients have been followed up for a minimum of 12 months. We assessed callus formation, radiological results, clinical outcome (according to the Constant Shoulder Score System) and complications. Any difference in the clinical recovery among the 2 types of fracture pattern (B and C) was investigated. Results: The mean time of fracture healing was 12.4 weeks. The mean Constant score at 3, 6 and 12 months was 68, 73 and 75 respectively. No statistically significant difference in the clinical outcome was observed between the B and C fracture patterns (p > 0.05). We noticed an overall of 5 complications (9.8%). There was no need to revision any of the implants. Conclusion: Anatomic reduction and proper plate positioning are essential for minimizing implantrelated complications. In our experience the S3 angular stability system offers a proper osteosyntesis and a good clinical recovery with a low rate of complications.     

双钢板内固定治疗胫骨平台复杂性骨折疗效分析

目的：探讨双钢板内固定治疗胫骨平台复杂性骨折的临床效果。方法回顾性分析39例采用双钢板内固定治疗的Schatzker吁型、遇型胫骨平台骨折,术后随访12~30个月,采用Rasmussen评分标准评定膝关节功能。结果术后塌陷(后髁)1例,余无内固定失败病例,术后膝关节功能优良率89.74%。结论双钢板内固定是目前治疗胫骨平台复杂性骨折比较理想的方法,愈合率高,并发症少。     

Two simple and inexpensive methods for preparing DNA suitable for digital PCR from a small number of cells in 96‐well plates

BackgroundAlthough DNA of high quality can be easily prepared from cultured cells with commercially available kits, many studies involve a large number of samples which increases the cost drastically. We optimized two simple and inexpensive methods for preparing DNA suitable for digital PCR from a small number of cells directly from wells of 96‐well plates.MethodsCells (number: 10³‐10⁴) were lysed with a Direct PCR^® lysis buffer or a 10% Chelex100® solution. The lysates were further purified and concentrated by means of DNA precipitation with a blue‐colored glycogen as a carrier. PCR and digital PCR were used to evaluate the efficiency of the two methods.ResultsFor 1000 cells from one primary culture and two tumor cell lines, DNA was reproducible and obtained with recovery rate (obtained/expected amount of DNA) in the range of 50%‐90% as measured by the fluorometer dyes instrument Qubit. Using 8 out of a total of 10 µL DNA solution for 1000 cells, both conventional PCR and digital PCR were successful. For digital PCR, more than 1600 positive droplets were obtained for DNA from 1000 cells using the Direct PCR^® method, corresponding to a yield efficiency of approximately 80%. Further reducing the number of cells down to 100 would be possible with 160 positive droplets expected. Both reagents are inexpensive (0.08€/sample).ConclusionsTwo methods are efficient, especially the Direct PCR^® reagent‐based method provides a simple and inexpensive method for preparing DNA suitable for digital PCR from small number of cells.     

Do patient-specific cutting guides and plates improve the accuracy of maxillary repositioning in hemifacial microsomia?

The aim of this retrospective study was to use computer-aided design and manufacturing (CAD/CAM) patient-specific plates and cutting guides for the waferless positioning and fixation of the maxilla after bimaxillary osteotomies in cases of hemifacial microsomia with condylar dysplasia or absence of the temporomandibular joint (TMJ), and to compare the results with the CAD/CAM fabricated surgical wafer by 3-dimensional analysis. Eighteen patients were selected from the hospital database, preoperative surgical planning and simulation were done on 3-dimensional computed tomographic models for all patients, and they were divided into Group I – in which CAD/CAM patient-specific cutting guides and plates were used; and Group II – in which CAD/CAM fabricated surgical wafers were used. Finally, the outcome was evaluated by comparing planned with postoperative outcomes. The largest discrepancies of the Le Fort I segment were 0.50 (0.18) mm in the anteroposterior direction and 0.82 (0.60)° in the yaw orientation with Group I. The largest discrepancies of the Le Fort I segment were 1.32 (1.40) mm in superioinferior direction and 8.48 (7.73)° in the yaw orientation with Group II. The CAD/CAM patient-specific cutting guides and plates proved to be reliable and have great value in improving the accuracy in repositioning the Le Fort I segment and in the efficacy of orthognathic treatment of hemifacial microsomia with condylar dysplasia or no TMJ. The CAD/CAM patient-specific cutting guides and plates are therefore a useful alternative to the wafer technique.     

Accuracy of position of cutting and drilling guide for sagittal split guided surgery: a proof of concept study

The benefits of three-dimensional planning and guided surgery have been realised over the last few years in maxillofacial surgery. Reproducing the exact positioning of the cutting and drilling guides on the flat mandibular angles defined by the engineer is a challenge for the surgeon and for the reliability of guided bilateral sagittal split osteotomy. Reference screws positioned on the skeleton before the acquisition of medical computed tomographic data can provide a fixed landmark that can be used during surgery and by the engineer during the design phase. The objective of this proof of concept in vitro study is to calculate the accuracy obtained for guides positioned by inserting a reference screw. The precision obtained for 30 guides following the insertion of 30 reference screws on 15 mandibular models was analysed. The models were scanned using an optical scanner and compared to CAD-CAM projects. The mean (SD) absolute position (in)-inaccuracy is 0.1616 (0.1141) mm for the entire guide surface and 0.13143 (0.0835) mm for the rim surface. The results indicate that the use of reference screws is efficient, and so they can be used to position guides accurately during guided bilateral sagittal split osteotomy.